If you have any problems about the flash disk is damaged and your verdict has been "dead" since you have been frustrated to fix it. Examples of such cases at the time of striking the flash on your computer, but the computer suddenly reboot (restart) itself and the flash drive is plugged Removable Disk was only detected, but it is also a command to reformat, but can not be formatted as write protected.
If you are using all the tools of good friends, including searching in google forum, but the result still does not work, here are a powerful way to fix it.
Consider the following steps:
1. Make sure the flash disk can still be detected and may be read as well as a removable disk can not be formatted can be uploaded and left unharmed (that you think flash is dead)
2. After that find the VID and PID, aka Vendor ID and Product ID flash disk by software via USB Viewer view. Software can be downloaded
here3. VID and PID seen in its connected devices, will appear Ox [PID] or Ox [VID]
4. See the description of the vendor ID here
5. Then visit the website http://flashboot.ru/iflash.html
6. VID and PID data content flash us in the search box labeled VID and PID.
7. Click the button next to it (Russian language)
8. It will display a list of names and details flash disk, find a line with your flash drive.
9. After that, copy and paste the text was in the far right column, in the row corresponding to your flash drive into the search box on the top right of the website (search and customize a program that fits your Flahsdisk)
10. It would appear that you have to download software
11. Click on the search results.
12. How to click the download button under the article
13. You will be asked to enter verification code
14. Fill and press the button, the software will be downloaded
15. Extract the file, then open the software, you should flash disk will be immediately detected
16. Click start
17. Well, wait a while until you are back to normal flash disk
Example:
Each type has a flash disk formatting software, respectively, so that the software could not be used by a different flash disks. Additional info if you're too lazy to use the above there is software that has been configured by
Roy Sukro (owner of the article) and does not need to be configured again.
DownloadThe way you just extract the file and run the named MPALL_F1_7F00_DL07_v320_00 then you just click update, Flahsdisk you will be read and you just simply click on start it, wait a while then your flash will work fine.
